GDC Band Pinching # Right Plier (3000/6)

GDC Band Pinching # Right Plier (3000/6)

It is used for pinching the band while preparing the tooth. Contour fitting to the side of a tooth is aided by the concave surface or depression at the outer ends of each of the band clamping portions. The purpose of the elevated edge is to provide a friction contact with a portion of the material of the strip to prevent it from slipping in the use of the plier in the operation of forming a band around a tooth

Features:

• Ergonomic Design
  
• Light in Weight
  
• Easy to Grip
  
• Corrosion Resistant
• Autoclavable at 135 degrees celsius
• Surgical grade stainless steel to ensure strength.

Key Specification:

• Name: Band Pinching Plier Right
• Type: Dental Universal Plier
• Category: Orthodontics
• Material: Stainless Steel
• Disposable / Reusable: Reusable

Direction to Use:

• INSTRUCTIONS REGARDING MAINTENANCE:-
  • Clean in an ultrasonic unit for 10 minutes with a no-rinse general-purpose solution with an included rust inhibitor. Keep tips open during cleaning.
  • Dry or drain instruments and dip them in the instrument solution.
  • Load pliers on the tray. The loading method should allow plier tips to remain open during sterilizing cycle.
  • Sterilize according to the manufacturer’s instructions.
  • After the sterilization cycle is complete, depressurize the equipment and allow the pliers to cool.
  • Remove instruments and make sure they are dry prior to storage.
  • Lubricate pliers with a silicon lubricant. DO NOT use tap water during any sterilization process and always dry instruments whenever they are rinsed.

Packaging:

• 1 x Band Pinching Plier Right